Cerwin Vega E-312 Xover Schematic

Here is the trace-out of my E-312 crossovers.   Component values that could not be read from the component itself where measured with my Fluke BK Precision model 886 LCR meter.

I recorded above the average of the 2 readings taken from both crossovers.

1,843 total views, 1 views today

Please follow and like us:

Cerwin Vega AT-15 Xover Schematic

I visually traced out the circuit layed out on the circuit board and then measured with Fluke BK Precision model 886 LCR meter.

Continue reading Cerwin Vega AT-15 Xover Schematic

2,676 total views, 1 views today

Please follow and like us:

ANL Add-On for Hallicrafters SX-16

Out here in beautiful rural East Texas, the noise levels on the HF bands are not too awful bad – IF you have a decent noise limiter or blanker.

We have some nasty short spike shortwave noise at a 33 mSec rep rate. It may be electric fences? our cable system?, but I have not tracked it down yet since I did not even know it existed due to modern receiver’s good noise blankers. (This explains the picket-fence spectrum of certain frequency ranges on the IF waterfall display).

Continue reading ANL Add-On for Hallicrafters SX-16

2,138 total views, no views today

Please follow and like us: