I visually traced out the circuit layed out on the circuit board and then measured with Fluke BK Precision model 886 LCR meter.
There was a little bit of difference between the 2 crossovers that I measured on a few components, but not too awful bad. I simply recorded the average of the 2 readings.
I tested both of the self-re-setting tweety circuit breakers and both worked fine (although oddly enough they sounded different when kicking off / on).
Was very surprised that the woofer is NOT crossed over at all ?!?!? (Perhaps there’s an in-line inductor elsewhere in the wiring to the woofer that I do not have?)
1,343 total views, 4 views today